In rooms with an already existing slope or where a slope
is formed e.g. by screed, the channel support element is
ideally suitable for the provision of the linear floor drain.
This is available with two different channels:
Drain system with high flow rate (vertical and horizontal)
TUB-LINE 70 RT …
Hard foam channel support element, with integrated and sealed floor channel drain in two lengths (70 x 750 mm / 70 x 850 mm), cover rail and frame made from stainless steel, cover rail in brushed stainless steel or tileable on the rear side, maintenance opening tileable with locking system, frame/rail adjustable by 10 mm in height. Including a 60 mm high substrate element.
Upper layer thickness (tile + adhesive) for TUB-LINE 70 RT- the shower base: minimum 14 mm, maximum 24 mm
- the tileable maintenance opening = 20 mm
- the tileable stainless steel channel cover = 12 mm
Sizes
| TUB-LINE 70 RT 900 S | 900 x 300 x 35 mm |
| TUB-LINE 70 RT 1200 S | 1200 X 300 x 35 mm |

Installation heights TUB-LINE 70 RT… + TUB-LINE 70 GK…

Please note: Dimensions in mm. Measures without adhesive coating and tiles.
TUB-LINE 40 RT
Hard foam channel support element, with integrated and sealed floor channel drain 40 x 750 mm, cover rail brushed stainless steel, maintenance opening tileable with locking system. Including a 60 mm high substrate element.
Upper layer thickness (tile + adhesive) for TUB-LINE 40 RT- the shower base: minimum 11 mm
- the tileable maintenance opening = 20 mm
Sizes
| TUB-LINE 40 RT 900 | 900 x 300 x 30 mm |

Installation heights TUB-LINE 40 RT… + TUB-LINE 40 GK…

Please note: Dimensions in mm. Measures without adhesive coating and tiles.
TUB-LINE… GK - Matching gradient elements for all channel supports
TUB-LINE 70 GK Q1 1200
TUB-LINE 70 GK R1 1200/900 S
TUB-LINE 40 GK R1 1200/900
Matching gradient elements TUB-LINE… GK are optionally available for all channel support elements. They can be attached to one or both sides of the channel support.
Combination possibilities


If necessary, they can be cut to size on the higher side to adapt them e.g. to a niche.
Product specifications
| Article- number |
Article- name |
Article- description |
Nominal formats/ dimensions |
Unit |
| LTUBE9106 | TUB-LINE 70 RT 900 S | Hard foam channel support element, with floor channel drain 70 x 750 mm, including substrate element, for coverings in thicknesses from 14-24 mm | 900 x 300 x 35 mm, substrate element 900 x 300 x 60 mm |
set |
| LTUBE9107 | TUB-LINE 70 GK R1 1200/900 |
Hard foam descending gradient element, sealed, incl. substrate element | 1200 x 900 x 35/50 mm, substrate element 1200 x 900 x 60 mm |
set |
| LTUBE9108 | TUB-LINE 70 RT 1200 S | Hard foam channel support element, with floor channel drain 70 x 850 mm, including substrate element, for coverings in thicknesses from 14-24 mm | 1200 x 300 x 35 mm, substrate element 1200 x 300 x 60 mm |
set |
| LTUBE9109 | TUB-LINE 70 GK Q1 1200 |
Hard foam descending gradient element, sealed, incl. substrate element | 1200 x 1200 x 35/50 mm, substrate element 1200 x 1200 x 60 mm |
set |
| LTUBE9206 | TUB-LINE 40 RT 900 | Hard foam channel support element, with floor channel drain 40 x 750 mm, including substrate element, for coverings in thicknesses from 11 mm | 900 x 300 x 30 mm, substrate element 900 x 300 x 60 mm |
set |
| LTUBE9207 | TUB-LINE 40 GK R1 1200/900 |
Hard foam descending gradient element, sealed, incl. substrate element | 1200 x 900 x 30/45 mm, substrate element 1200 x 900 x 60 mm |
set |

- Point drainage
-
LUX ELEMENTS®- TUB
The flush with the floor shower base for one-point drainage
The design variants and dimensions
Flush with the floor shower bases for the use on wooden sub-constructions
Shower bases as a substitute for bath tubs
LUX ELEMENTS®- TUB-BA
- Linear drainage
-
LUX ELEMENTS®- TUB-LINE
Flush with the floor shower bases for linear drainage
LUX ELEMENTS®- TUB-LINE 70 − Covering thicknesses and installation heights
LUX ELEMENTS®- TUB-LINE ... RT / GK − Channel support and gradient elements
- Partition wall & cladding element
-
LUX ELEMENTS®- TUB-TW
LUX ELEMENTS®- TUB-TRS
- Building kits
-
LUX ELEMENTS®- TUB
LUX ELEMENTS®- TUB-RD
Panel, decorative elements & accessories
LUX ELEMENTS®- TUB-SD
LUX ELEMENTS®- TUB-RSE
The space-saving corner shower
LUX ELEMENTS®- TUB-JUNIOR
- Floor drain & accessories
-
LUX ELEMENTS®- TUB-BA ...
Floor drain systems (vertical) for point drainage
Floor drain systems (horizontal) for point drainage
Accessories for the floor drain systems
LUX ELEMENTS®- TUB-LINE DRA...
Drain connection for linear drainage
LUX ELEMENTS®- TUB-TSM
LUX ELEMENTS®- TUB-KIT
- Datasheets
-
LUX ELEMENTS®- TUB - Shower base elements (1,3 MB) LUX ELEMENTS®- TUB - TSM (53 KB) LUX ELEMENTS®- TUB-LINE (1014 KB)
- Safety Data Sheets
-
- Installation instructions
-
LUX ELEMENTS®- TUB - BAS-...100 (339 KB) LUX ELEMENTS®- TUB - BOL ... H/M (1 MB) LUX ELEMENTS®- TUB - BOL ... S (980 KB) LUX ELEMENTS®- TUB - HEQ/HER (1006 KB) LUX ELEMENTS®- TUB - Instructions for assembly and upkeep (945 KB) LUX ELEMENTS®- TUB-LINE (728 KB) LUX ELEMENTS®- TUB-RD (2 MB) LUX ELEMENTS®- TUB-RSE (2 MB) LUX ELEMENTS®- TUB-SD (2 MB)
- Test certificates
-
DIN CERTO - P1B036/05, dated 2008-04-18 (658 KB)Shower receptor units LUX ELEMENTS - TUB >= 120 x 120 cm conforms to Certification scheme barrier-free designs, buldings and products
DIN CERTO - P1B037/05, dated 2008-04-18 (660 KB)Shower receptor units LUX ELEMENTS - TUB >= 150 x 150 cm conforms to Certification scheme barrier-free designs, buldings and products
- Product & packaging specs
-
LUX ELEMENTS®- TUB - Floor drain system (horizontal) (113 KB) LUX ELEMENTS®- TUB - Floor drain system (vertical) (154 KB) LUX ELEMENTS®- TUB - Accessories (152 KB) LUX ELEMENTS®- TUB - Shower base (241 KB) LUX ELEMENTS®- TUB- Partition walls and mounting aids (65 KB) LUX ELEMENTS®- TUB-BOL Substitute for bath tubs (66 KB) LUX ELEMENTS®- TUB-HER/HEQ Use on wooden sub-constructions (49 KB) LUX ELEMENTS®- TUB-JUNIOR (57 KB) LUX ELEMENTS®- TUB-LINE ... RT / GK Channel support (85 KB) LUX ELEMENTS®- TUB-LINE 40 (71 KB) LUX ELEMENTS®- TUB-LINE 70 (82 KB) LUX ELEMENTS®- TUB-LINE Floor drain supports and accessories (117 KB) LUX ELEMENTS®- TUB-RD - Round shower (52 KB) LUX ELEMENTS®- TUB-RSE - Space-saving corner shower (66 KB) LUX ELEMENTS®- TUB-SD - Curved shower (54 KB)
- Systemcomponents
- The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
LUX ELEMENTS®- ARM:
Reinforcement fabricLUX ELEMENTS®- DRY:
Sealing filler and sealing tapes
![]()
Before printing a pdf file, please check if this is really necessary.
Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.
