The square or rectangular flush with the floor shower bases made of hard foam support material for linear drainage, are all equipped with a sealed-in drain channel and a tileable maintenance opening. This is of great advantage to the builders during installation and later – during use – for cleaning and maintenance purposes.
All TUB-LINE components are offered as a set with the matching substrate element.
1. Tileable maintenance openings
2. Sealed-in drain channel
(70er oder 40er)
3. Factory sealing
4. Shower base with gradient
(1- or 4-sided, various thickness grades)
5. 
Suitable drain connection with high flow rate (vertical or horizontal)
6. Substrate element
(60 mm high)
For linear drainage, LUX ELEMENTS differentiates between three systems:
TUB-LINE 70 - The luxury model in drain channels
Shower bases in two shapes (square, rectangular) with sealed-in drain channel 70 x 750 mm. The turnable channel offers two designs in one product: one side has a brushed stainless steel surface, the other side can be tiled to match the surface design of the entire shower base.
Available in two different gradient versions and for two different covering thicknesses. Large channel lengths are available upon request.
TUB-LINE 40 - The plain, elegant alternative
The shower bases in two shapes (square, rectangular) with sealed-in drain
channel 40 x 750 mm. This slim channel with its brushed stainless steel
surface looks extremely modest and noble.
Available in two different gradient variants.
TUB-LINE ... RT and TUB-LINE ... GK - Channel support and gradient elements
Channel support elements are suitable e.g. wherever a slope exists in a room
or where a slope is formed using screed. The hard foam channel support
element with sealed-in drain channel is only 300 mm deep and has no slope.
Available in various lengths with both channel variants. The slope can be optionally formed with a suitable hard foam support element.
- Point drainage
-
LUX ELEMENTS®- TUB
The flush with the floor shower base for one-point drainage
The design variants and dimensions
Flush with the floor shower bases for the use on wooden sub-constructions
Shower bases as a substitute for bath tubs
LUX ELEMENTS®- TUB-BA
- Linear drainage
-
LUX ELEMENTS®- TUB-LINE
Flush with the floor shower bases for linear drainage
LUX ELEMENTS®- TUB-LINE 70 − Covering thicknesses and installation heights
LUX ELEMENTS®- TUB-LINE ... RT / GK − Channel support and gradient elements
- Partition wall & cladding element
-
LUX ELEMENTS®- TUB-TW
LUX ELEMENTS®- TUB-TRS
- Building kits
-
LUX ELEMENTS®- TUB
LUX ELEMENTS®- TUB-RD
Panel, decorative elements & accessories
LUX ELEMENTS®- TUB-SD
LUX ELEMENTS®- TUB-RSE
The space-saving corner shower
LUX ELEMENTS®- TUB-JUNIOR
- Floor drain & accessories
-
LUX ELEMENTS®- TUB-BA ...
Floor drain systems (vertical) for point drainage
Floor drain systems (horizontal) for point drainage
Accessories for the floor drain systems
LUX ELEMENTS®- TUB-LINE DRA...
Drain connection for linear drainage
LUX ELEMENTS®- TUB-TSM
LUX ELEMENTS®- TUB-KIT
- Datasheets
-
LUX ELEMENTS®- TUB - Shower base elements (1,3 MB) LUX ELEMENTS®- TUB - TSM (53 KB) LUX ELEMENTS®- TUB-LINE (1014 KB)
- Safety Data Sheets
-
- Installation instructions
-
LUX ELEMENTS®- TUB - BAS-...100 (339 KB) LUX ELEMENTS®- TUB - BOL ... H/M (1 MB) LUX ELEMENTS®- TUB - BOL ... S (980 KB) LUX ELEMENTS®- TUB - HEQ/HER (1006 KB) LUX ELEMENTS®- TUB - Instructions for assembly and upkeep (945 KB) LUX ELEMENTS®- TUB-LINE (728 KB) LUX ELEMENTS®- TUB-RD (2 MB) LUX ELEMENTS®- TUB-RSE (2 MB) LUX ELEMENTS®- TUB-SD (2 MB)
- Test certificates
-
DIN CERTO - P1B036/05, dated 2008-04-18 (658 KB)Shower receptor units LUX ELEMENTS - TUB >= 120 x 120 cm conforms to Certification scheme barrier-free designs, buldings and products
DIN CERTO - P1B037/05, dated 2008-04-18 (660 KB)Shower receptor units LUX ELEMENTS - TUB >= 150 x 150 cm conforms to Certification scheme barrier-free designs, buldings and products
- Product & packaging specs
-
LUX ELEMENTS®- TUB - Floor drain system (horizontal) (113 KB) LUX ELEMENTS®- TUB - Floor drain system (vertical) (154 KB) LUX ELEMENTS®- TUB - Accessories (152 KB) LUX ELEMENTS®- TUB - Shower base (241 KB) LUX ELEMENTS®- TUB- Partition walls and mounting aids (65 KB) LUX ELEMENTS®- TUB-BOL Substitute for bath tubs (66 KB) LUX ELEMENTS®- TUB-HER/HEQ Use on wooden sub-constructions (49 KB) LUX ELEMENTS®- TUB-JUNIOR (57 KB) LUX ELEMENTS®- TUB-LINE ... RT / GK Channel support (85 KB) LUX ELEMENTS®- TUB-LINE 40 (71 KB) LUX ELEMENTS®- TUB-LINE 70 (82 KB) LUX ELEMENTS®- TUB-LINE Floor drain supports and accessories (117 KB) LUX ELEMENTS®- TUB-RD - Round shower (52 KB) LUX ELEMENTS®- TUB-RSE - Space-saving corner shower (66 KB) LUX ELEMENTS®- TUB-SD - Curved shower (54 KB)
- Systemcomponents
- The tried and tested accessories are fully harmonised for processing ELEMENT. Specially developed adhesives and mortars, sealing tapes, mounting angles and plugs ensure problem-free processing.
LUX ELEMENTS®- ARM:
Reinforcement fabricLUX ELEMENTS®- DRY:
Sealing filler and sealing tapes
Before printing a pdf file, please check if this is really necessary.
Environmental protection concerns us all.
To view the PDF files, you will need Acrobat Reader that you can download here free-of-charge. This program will enable you to open, view and print out these documents in PDF format.
