Wall-mounted elements - Planking of a support construction

1

When planking with wall-mounted system elements, the information issued by the respective manufacturer must be taken into consideration.

2

The shorter Baby construction panels from ELEMENT-EL Baby 10 are suitable for this application. When planking with wall-mounted system elements, the information issued by the respective manufacturer must be taken into consideration.

3

The wall-mounted construction forms the subconstruction, the ELEMENT construction panels are cut to size.

4

Please also observe the information issued by the manufacturer of the wall-mounted elements for assembly direction (vertical or horizontal).

5

The ELEMENT construction panels are glued together with COL-MK. Apply the adhesive to the plate edges as an uninterrupted strand.

6

The screw connection should take place with the washer FIX-S 35 and a suitable screw. Diagonal joints are not allowed. Observe the wall-mounted element manufacturer’s recommendation as to spacing.

7

Planking can be done in full room height or with a shelf above the installations. ELEMENT-EL 20 is suitable for the top covering. This is glued with COL-MK and fixed using FIX-S 35 and a suitable screw.

8

Reinforce all element joints and transitions with glass fibre reinforcement strips ARM-100 SK and ...

9

... finally level out the element joints and the heads of the mounting elements with COL-AK. The surface is now ready for tiling. Further requirements (e.g. sealing) must be taken into consideration in accordance with national directives.

powered by webEdition CMS