Construction panel for underfloor heating – FLOOR-WH F

Hard foam support element with milling for installing underfloor heating pipes under ceramic surfaces

no-img
  • no-img
no-img

FLOOR-WH F 30-150
hard foam support element, with milled holes, laying distance 150 mm,
1260 x 600 x 30 mm

FLOOR-WH F 50-150
hard foam support element, with milled holes, laying distance 150 mm,
1260 x 600 x 50 mm

FLOOR-WH F 30-100
hard foam support element, with milled holes, laying distance 100 mm,
1260 x 600 x 30 mm

FLOOR-WH F 50-100
hard foam support element, with milled holes, laying distance 100 mm,
1260 x 600 x 50 mm

  • Hard foam support element with milling for installing underfloor heating pipes under ceramic surfaces
  • Distance for layering the heating pipe 150 or 100 mm
  • Installation and insulating element in one
  • Low installation heights – ideal for renovations
  • Quick and easy installation
  • No screed necessary
  • Short drying times during renovation
  • Rapid heating of the room due to direct heat dissipation into the ceramic top covering
  • Suitable for water heating with pipe diameter 16 mm
  • Simple to process for adaptation to room situation

Note:
FLOOR-WH F is suitable for use on either wooden floors or mineral substrates such as concrete or screed. Using FLOOR-WH F 30 the fixing adhesive must always be applied over the full surface, FLOOR-WH F 50 can also be placed on dots (dots spacing ≤ 200 mm). For wooden floors, full coverage adhesion is always required.

Dimensions

Distance for laying the heating pipes:
150 mm

Distance for laying the heating pipes:
100 mm

Product specifications


Bevor Sie ein PDF ausdrucken, prüfen Sie bitte, ob dies wirklich nötig ist. Umweltschutz geht uns alle an. Zum Betrachten der PDF-Dokumente benötigen Sie entweder den kostenlosen Acrobat Reader oder einen freien PDF-Viewer. Mit Hilfe dieser Betrachterprogramme können die PDF-Dokumente geöffnet, angeschaut und gedruckt werden.

powered by webEdition CMS