Flush with the floor extra-slim shower bases with integrated drain technology – TUB-COMBI

The TUB-COMBI models combine a shower base or shower drain elements with a horizontal floor drain, which is already integrated. The substrate element is therefore omitted and the shower base is particularly flat.

LUX ELEMENTS®-TUB-COMBI
Standard-compliant sealing for highly stressed areas according to DIN 18534, Part 6

 

no-img

Available as TUB-COMBI MQ SET 300 with DN 50 connector and TUB-COMBI-S with DN 40 connector.

no-img

Ex. TUB-COMBI MQ SET 300
drain in the centre

no-img

Ex. TUB-COMBI-S MQ
drain in the centre

no-img

Ex. TUB-COMBI-S ER
drain off-centre

no-img

Ex. TUB-COMBI S BOL
drain in gradient area in the centre

See also:
TUB-LINE-COMBI - Linear drainage
TUB-LINE COMBI RT - Channel support

TUB-COMBI-S

  • Combination of shower base and horizontal floor drain support (connection DN 40)
  • Also for the substitution of bath tubs (TUB-COMBI-S BOL)
  • Factory sealing and prefabricated gradient (four-sided)
  • Extra-flat shower base height: 55/65 mm
  • For barrier-free construction
  • Second drainage level
  • Good drainage capacity: 0,8 l/s resp. 48 l/min
  • Large selection of grate fitting frames depending on the covering thickness (tile + adhesive) of the shower base:
    • TUB RA-A with standard grate: from a covering thickness of 9 mm
    • TUB RA-S with standard grate: from a covering thickness of 14 mm
    • TUB-RA-DC/DM/DL/DV/DS/DF with design grate: from a covering thickness of 14 mm
    • TUB-RA-DF with tileable cover: from a covering thickness of 14 mm
 
  

 

 

 

 

 

 

 

 

 

 

 

 

 

  

 

1. Standard grate
standard grate or design grate

2. Grate fitting frame
Cut-to-size

3. Shower base element
Hard foam support material with dual-sided mortar coating and glass fibre fabric, 4-sided slope with sealing on the upper side

4. Plastic reinforcement
Stability in the area of the drain pipe

5. Floor drain system
with integrated and sealed horizontal floor drain DN 40 with odour trap

6. Sealing sleeve
200 x 800 mm

TUB-COMBI MQ SET 300

  • For the installation in screed floors with slope
  • Combination of shower drain element and horizontal floor drain support (DN 50)
  • Including loose sealing sleeve
  • Extra-flat shower base height: 68 mm
  • For barrier-free construction
  • Second drainage level
  • Drainage capacity 1,0 l/s (higher than required by standard)
  • Large selection of grate fitting frames (incl. standard or design grate)

TUB-COMBI-S MQ SET 300 (extra-slim)

  • For the installation in screed floors with slope
  • Combination of shower drain element and horizontal floor drain support (DN 40)
  • Including loose sealing sleeve
  • Extra-flat shower base height: 55 mm
  • For barrier-free construction
  • Second drainage level
  • Drainage capacity 0,8 l/s
  • Large selection of grate fitting frames (incl. standard or design grate)

Installation heights

Technical data in comparison

TUB-COMBI MQ SET 300 TUB-COMBI-S
Installation height:
Drain/Outer edge
68 mm 55/65 mm
Floor drain support DN 50 horizontal DN 40 horizontal
Drainage capacity 1,0 l/s 0,8 l/s

Mounting accessories (KITs)

Complete set mounting accessories on offer for all sizes of flush with the floor shower bases.

Product specifications

Shower receptor units LUX ELEMENTS - TUB >= 1200 x 1200 mm
DIN CERTO - P1B036 (1018 KB)

Shower receptor units LUX ELEMENTS - TUB >= 1500 x 1500 mm
DIN CERTO - P1B037 (1019 KB)

LUX ELEMENTS®- TUB - BOL - substitute for bath tubs (85 KB)
LUX ELEMENTS®- TUB - COMBI (172 KB)
LUX ELEMENTS®- TUB - combinable floor drain systems (466 KB)
LUX ELEMENTS®- TUB - complete floor drain systems (194 KB)
LUX ELEMENTS®- TUB - floor drain systems accessories (260 KB)
LUX ELEMENTS®- TUB - KIT (166 KB)
LUX ELEMENTS®- TUB - LINE - COMBI RT / GK (373 KB)
LUX ELEMENTS®- TUB - LINE - COMBI V RT / GK - Floor channel drain with integrated drain technology with extended cover rail (381 KB)
LUX ELEMENTS®- TUB - LINE - floor shower bases for linear drainage (120 KB)
LUX ELEMENTS®- TUB - LINE FINISH - Flush with the floor shower bases including surface element (142 KB)
LUX ELEMENTS®- TUB - LINE H - for the use on wooden sub-construction (241 KB)
LUX ELEMENTS®- TUB - PUMP - with integrated floor drain pump (178 KB)
LUX ELEMENTS®- TUB - shower base (105 KB)
LUX ELEMENTS®- TUB - substrate element (564 KB)
LUX ELEMENTS®- TUB-FINISH - Flush with the floor shower bases including surface element (64 KB)
LUX ELEMENTS®- TUB-H - for the use on wooden sub-constructions (80 KB)
LUX ELEMENTS®- TUB-H BOL - for installation in and on wooden sub-constructions for the substitution of bath tubs (87 KB)
LUX ELEMENTS®- TUB-LINE - BOL - substitute for bath tubs (109 KB)
LUX ELEMENTS®- TUB-LINE - floor drain systems und accessories (307 KB)
LUX ELEMENTS®- TUB-LINE BOL V - Flush with the floor shower bases with extended cover rail (116 KB)
LUX ELEMENTS®- TUB-LINE COMBI (187 KB)
LUX ELEMENTS®- TUB-LINE RT / GK (439 KB)
LUX ELEMENTS®- TUB-LINE V - Floor channel drains with extended cover rail (180 KB)
LUX ELEMENTS®- TUB-LINE V RT / GK - Floor channel drains with extended cover rail (418 KB)
LUX ELEMENTS®- TUB-MQ-SET 300 - shower drain element (70 KB)
LUX ELEMENTS®-MODUL-ROOM - Floor drain supports and accessories TUB (117 KB)


Before printing a pdf file, please check if this is really necessary. Environmental protection concerns us all.

To view the PDF documents you will need either the Acrobat Reader or a PDF-Viewer, both available free of charge. Using these programs the PDF documents can be opened, viewed and printed.

powered by webEdition CMS